5 point harness
Page 1 of 1 • Share •
5 point harness
For those that have harnesses, how did you go about attaching the belts to the tub?
_________________
"You'd better come to the table with at least 24 inches of wheel travel and 1,000 hp to get noticed nowadays."

SUPAFLY- Moderator
- Posts: 871
Join date: 2007-12-06
Age: 32
Location: Renton, WA

Re: 5 point harness
Rockhard makes a bolt on harness bar that goes behind the seats and bolts to the cage main hoop. Uses the same clamping design as the rest of their cage.

wsm04rubi- Admin and VP
- Posts: 1413
Join date: 2007-12-05
Location: Snohomish, WA

Re: 5 point harness
I'm talking about the lap belts and how to attach them to the tub.
_________________
"You'd better come to the table with at least 24 inches of wheel travel and 1,000 hp to get noticed nowadays."

SUPAFLY- Moderator
- Posts: 871
Join date: 2007-12-06
Age: 32
Location: Renton, WA

Re: 5 point harness
i only had 4 points.......(Had them didn't like them) Anyway back to topic. The lap belt I just attached to the stock locations, rollbar/inside of seat. HTH

chrisstewart36- Tire Kicker
- Posts: 60
Join date: 2008-02-07
Age: 27
Location: puyallup
Re: 5 point harness
I ended up using lifting eye bolts with plate washers under the sheet metal and a quick clasp rated at 2000lbs each! Just got my harness bar tacked into place for the shoulder belts. I'll take pics when its all finished. I'll probably only be wearing the lap belts this Sunday, but its fine.
_________________
"You'd better come to the table with at least 24 inches of wheel travel and 1,000 hp to get noticed nowadays."

SUPAFLY- Moderator
- Posts: 871
Join date: 2007-12-06
Age: 32
Location: Renton, WA

Re: 5 point harness
A little after the fact, but mine are all attached to the roll bar

Zip- Club Member
- Posts: 1133
Join date: 2007-12-07
Location: Renton, WA
Permissions of this forum:
You cannot reply to topics in this forum
R-n-L Site



