Home
FAQ
Search
Register
Log in
R-n-L SiteGroovy
Groovy
wsm04rubi on Sat Nov 08, 2008 10:27 pm
That's what my new tires are 
Got them grooved today!!! The tire groover worked great Justin! I just did a single groove across the middle of the 'V' on each of the tread blocks. Took about an hour and a half to do all 4 tires.
Only burned myself once
Got them grooved today!!! The tire groover worked great Justin! I just did a single groove across the middle of the 'V' on each of the tread blocks. Took about an hour and a half to do all 4 tires.
Only burned myself once
_________________
Bill
<-Click
wsm04rubi- Admin and VP
- Posts: 1413
Join date: 2007-12-05
Location: Snohomish, WA 
Re: Groovy
SUPAFLY on Sun Nov 09, 2008 1:32 am
Cool! How many blades did you break? I went through a bunch of blades before I figured out how hard I could push. Oh yeah, THIS THREAD IS WORTHLESS WITHOUT PICS!
_________________
"You'd better come to the table with at least 24 inches of wheel travel and 1,000 hp to get noticed nowadays."
SUPAFLY- Moderator
- Posts: 871
Join date: 2007-12-06
Age: 32
Location: Renton, WA -
Re: Groovy
wsm04rubi on Sun Nov 09, 2008 10:32 am
SUPAFLY wrote:Cool! How many blades did you break? I went through a bunch of blades before I figured out how hard I could push. Oh yeah, THIS THREAD IS WORTHLESS WITHOUT PICS!
I didn't break any blades
Only used the one blade, and it was still sharp when I finished!
I'll post up pics after I get home from church...
_________________
Bill
<-Click
wsm04rubi- Admin and VP
- Posts: 1413
Join date: 2007-12-05
Location: Snohomish, WA -
Re: Groovy
wsm04rubi on Sun Nov 09, 2008 3:05 pm
Okay, here is a math equation:
+
=
+
=
_________________
Bill
<-Click
wsm04rubi- Admin and VP
- Posts: 1413
Join date: 2007-12-05
Location: Snohomish, WA -
Re: Groovy
mumblewood on Sun Nov 09, 2008 3:20 pm
Looks good, now lets get them on some rims and use them 
_________________
This is were my signature goes
mumblewood- Club Founder
- Posts: 1042
Join date: 2007-12-07
Age: 34
Location: Renton Wa. -
Re: Groovy
wsm04rubi on Sun Nov 09, 2008 3:21 pm
As soon as I sell my hardtop...
_________________
Bill
<-Click
wsm04rubi- Admin and VP
- Posts: 1413
Join date: 2007-12-05
Location: Snohomish, WA -
Re: Groovy
SUPAFLY on Sun Nov 09, 2008 3:56 pm
If you wanted more wet traction for the street, you could turn the blade upside down and sipe all the lugs.
_________________
"You'd better come to the table with at least 24 inches of wheel travel and 1,000 hp to get noticed nowadays."
SUPAFLY- Moderator
- Posts: 871
Join date: 2007-12-06
Age: 32
Location: Renton, WA -
Re: Groovy
wsm04rubi on Sun Nov 09, 2008 4:00 pm
SUPAFLY wrote:If you wanted more wet traction for the street, you could turn the blade upside down and sipe all the lugs.
I may just pay the tire store to sipe them when I get them mounted. Or I may just run them for a while and see how they do. I only drive about 8 miles round trip per day.
_________________
Bill
<-Click
wsm04rubi- Admin and VP
- Posts: 1413
Join date: 2007-12-05
Location: Snohomish, WA -
Permissions of this forum:
You cannot reply to topics in this forum