http://rockdnlockd.forumotion.com/drivetrain-f8/-t1.htm Anything related to drivetrain, axles and performance modifications goes here. Mon, 26 Oct 2009 19:46:34 GMT 10 http://www.rockd-n-lockd.com/images/forumheader.jpg http://rockdnlockd.forumotion.com/drivetrain-f8/-t1.htm http://rockdnlockd.forumotion.com/drivetrain-f8/death-wobble-t535.htm MadMark MadMark wrote:For those of you that don't know I bought the Super Swampers(AKA DEATH WOBBLE DONUTS) from bill. As I was driving up to Evans creek (slightly fast) I hit a large pothole and experienced first hand what death wobble is all about. As I slowed down to keep from launching off the side of road and to remove the sheep skin seat cover from my crack I had just one thought, Bill's Fault Just because I haven't had the front end aligned, installed the steering shock or crawled under my jeep ... Drivetrain Mon, 26 Oct 2009 19:46:34 GMT http://rockdnlockd.forumotion.com/drivetrain-f8/death-wobble-t535.htm#7284 http://rockdnlockd.forumotion.com/drivetrain-f8/death-wobble-t535.htm http://rockdnlockd.forumotion.com/drivetrain-f8/new-transfer-case-the-xj-lives-t496.htm xj97jks Well I couldnt go to rubicon due to four wheel drive not working all the time...so while you guys were gone me and a friend tore into the transfer case and pretty much came to the conclusion that my four low is non existent haha...so tonight I went to puyallup and met up with a craigslist guy and bought a slightly used transfer case for 80 bucks!!! putting it in tomorrow!!! Jeep will be back up and running!!! Drivetrain Sun, 30 Aug 2009 08:19:46 GMT http://rockdnlockd.forumotion.com/drivetrain-f8/new-transfer-case-the-xj-lives-t496.htm#6945 http://rockdnlockd.forumotion.com/drivetrain-f8/new-transfer-case-the-xj-lives-t496.htm http://rockdnlockd.forumotion.com/drivetrain-f8/yukon-axle-dana-30-t404.htm MadMark 1) Is the ouside diameter of Yukon axles larger. (27 spline have not pulled apart to measure the differance)
2) Will the inner seal need replaced. (differant size)
3) The outboard tube seal is really tight on Yukon axle, is that normal.
I noticed that a number of you have installed the tube seal, any problems.
Thanks for any help.]]> Drivetrain Thu, 12 Mar 2009 20:18:29 GMT http://rockdnlockd.forumotion.com/drivetrain-f8/yukon-axle-dana-30-t404.htm#6024 http://rockdnlockd.forumotion.com/drivetrain-f8/yukon-axle-dana-30-t404.htm http://rockdnlockd.forumotion.com/drivetrain-f8/dana-300-in-tj-t382.htm boknows Does anyone know of someone running a dana 300 in a TJ? Thinking about upgrading TC and options are 241, dana 300, and atlas. I like the idea of a dana being 6 in shorter than 231 but don't know what kind of fitment issues I might have. Also like abilty of twin stick. Any advice? Drivetrain Thu, 05 Feb 2009 21:12:21 GMT http://rockdnlockd.forumotion.com/drivetrain-f8/dana-300-in-tj-t382.htm#5738 http://rockdnlockd.forumotion.com/drivetrain-f8/dana-300-in-tj-t382.htm http://rockdnlockd.forumotion.com/drivetrain-f8/i-got-the-p0432-code-t339.htm ILAN_Rubi Well, recently my engine light came on and thanks to Young he showed me how to get the codes. I’m showing a P0432, thanks to Bill's listing, it show as a P0432 Main Catalyst Efficiency Below Threshold (Bank 2) I have been doing some research and found that some people have changed their 02 sensors and some have had to replace their catalytic converters. Has anyone on here received this code? If so, what was your experience with it? I also came across this “Federally mandated 8yr 80,000 mile ... Drivetrain Wed, 24 Dec 2008 04:22:17 GMT http://rockdnlockd.forumotion.com/drivetrain-f8/i-got-the-p0432-code-t339.htm#5313 http://rockdnlockd.forumotion.com/drivetrain-f8/i-got-the-p0432-code-t339.htm http://rockdnlockd.forumotion.com/drivetrain-f8/sway-bar-or-no-sway-bar-t347.htm Crazy_Jeeper_7 I have my CJ outfitted with a Rocky-Road SOA with High Steer but my sway bar and extensions bind backwards and get pinned between the YJ Spring and the tie rod bracket not allowing me to turn. Rocky-Road suggests in their packet not to even run a sway bar since it doesn't do anything more than what the leaf springs and hydro shocks are doing. What do you guys think? Take the sway bar out all together or fab/buy the 4" extended sway bar brackets to get the sway bar and extensions lined ... Drivetrain Mon, 05 Jan 2009 22:27:08 GMT http://rockdnlockd.forumotion.com/drivetrain-f8/sway-bar-or-no-sway-bar-t347.htm#5468 http://rockdnlockd.forumotion.com/drivetrain-f8/sway-bar-or-no-sway-bar-t347.htm http://rockdnlockd.forumotion.com/drivetrain-f8/arb-compressor-t361.htm xj97jks So I FINALLY got my compressor for my front locker installed....so on the next outing, I will actually be locked hahaha. No more of this open diff crap!!! Drivetrain Tue, 13 Jan 2009 23:17:12 GMT http://rockdnlockd.forumotion.com/drivetrain-f8/arb-compressor-t361.htm#5568 http://rockdnlockd.forumotion.com/drivetrain-f8/arb-compressor-t361.htm http://rockdnlockd.forumotion.com/drivetrain-f8/front-cv-axles-for-a-rubicon-i-got-some-t330.htm mumblewood I am getting the opportunity to test out some new CV Axles for the Rubicon. They're made by Longfield Super Axles and if you know anything about Toyotas then you know he builds the best! http://longfieldsuperaxles.com/ I am supposed to beat on these to try to break them. If they perform well they will go into production. I'm getting them installed tomorrow. Pic's on my rig to follow. Drivetrain Sun, 14 Dec 2008 00:53:29 GMT http://rockdnlockd.forumotion.com/drivetrain-f8/front-cv-axles-for-a-rubicon-i-got-some-t330.htm#5228 http://rockdnlockd.forumotion.com/drivetrain-f8/front-cv-axles-for-a-rubicon-i-got-some-t330.htm http://rockdnlockd.forumotion.com/drivetrain-f8/my-sealed-wheel-bearing-assembly-t191.htm rubicons4 So after lot's and lot's of troubleshooting I finally replaced both front wheel hubs. Even though they did not make noise off the ground or have any play, they were bad. The Jeep now rides really smooth. Drivetrain Fri, 16 May 2008 16:02:20 GMT http://rockdnlockd.forumotion.com/drivetrain-f8/my-sealed-wheel-bearing-assembly-t191.htm#3583 http://rockdnlockd.forumotion.com/drivetrain-f8/my-sealed-wheel-bearing-assembly-t191.htm http://rockdnlockd.forumotion.com/drivetrain-f8/locker-by-pass-t188.htm ILAN_Rubi Just something to share.......So..... I was bored this last Satuday and needed something to do. Some of you probably have already done this but, for those who haven't..... I did the Locker by-pass w/ a dead man switch, which works out real well. It only took 10 min max to do and now....I can lock'em up in 2H, 4H and 4L also like normal they still won't engage over 10 mph and diengage over 40mph. (I haven't personally checked to see if it does but, will soon...lol). The dead man switch is to shut ... Drivetrain Tue, 13 May 2008 18:41:03 GMT http://rockdnlockd.forumotion.com/drivetrain-f8/locker-by-pass-t188.htm#3463 http://rockdnlockd.forumotion.com/drivetrain-f8/locker-by-pass-t188.htm http://rockdnlockd.forumotion.com/drivetrain-f8/dana-35-or-44-t162.htm misone thanks]]> Drivetrain Wed, 09 Apr 2008 02:54:05 GMT http://rockdnlockd.forumotion.com/drivetrain-f8/dana-35-or-44-t162.htm#2931 http://rockdnlockd.forumotion.com/drivetrain-f8/dana-35-or-44-t162.htm http://rockdnlockd.forumotion.com/drivetrain-f8/check-engine-light-on-t45.htm wsm04rubi ]]> Drivetrain Thu, 27 Dec 2007 18:52:58 GMT http://rockdnlockd.forumotion.com/drivetrain-f8/check-engine-light-on-t45.htm#504 http://rockdnlockd.forumotion.com/drivetrain-f8/check-engine-light-on-t45.htm http://rockdnlockd.forumotion.com/drivetrain-f8/825-lsd-t82.htm 2KXJ Thanks,

Rich

I can't afford a locker, I can't afford an 8.8, I can't afford a d44, I can't afford...]]> Drivetrain Wed, 30 Jan 2008 23:49:48 GMT http://rockdnlockd.forumotion.com/drivetrain-f8/825-lsd-t82.htm#1098 http://rockdnlockd.forumotion.com/drivetrain-f8/825-lsd-t82.htm http://rockdnlockd.forumotion.com/drivetrain-f8/front-driveline-t17.htm mumblewood I need a new front one and I got a place in Kansas that I like to order from (CHEAP OEM PARTS) but I cant seem to find it on there web site. Does anyone know were to get the part # if not I'll go to the dealership to get the # Im just trying to be lazy and use our new forum. By the way, here is the place I like to go if anyone wants to know http://www.allchryslerparts.com/ Oh ya, its for an 03' Rubicon 5speed Drivetrain Fri, 07 Dec 2007 05:33:43 GMT http://rockdnlockd.forumotion.com/drivetrain-f8/front-driveline-t17.htm#57 http://rockdnlockd.forumotion.com/drivetrain-f8/front-driveline-t17.htm