Reiter Trails 2/21/2009
Page 1 of 1 • Share •
Reiter Trails 2/21/2009
We had a great time wheeling today. We ran Back Door, played around the rock wall on the Power Line trail for a while, then ran Isabelle, and Trail of Doom. Trail of Doom was really fun - awesome trail. It's short, but really gnarly.
I never took a count, but we had at least 10 rigs out there today.
I didn't take many pics. The only place I got my camera out was playing around on the rock wall. Hopefully others will post up some of their pics. Here are some of mine:







I never took a count, but we had at least 10 rigs out there today.
I didn't take many pics. The only place I got my camera out was playing around on the rock wall. Hopefully others will post up some of their pics. Here are some of mine:








wsm04rubi- Admin and VP
- Posts: 1413
Join date: 2007-12-05
Location: Snohomish, WA

Re: Reiter Trails 2/21/2009
Awesome pics Bill! Especially the one of zip on the rackface.
Vids will take a bit longer, over 100 clips and 10GB to edit thru.
~Jim
Vids will take a bit longer, over 100 clips and 10GB to edit thru.
~Jim
Jim1973- Tire Kicker
- Posts: 65
Join date: 2007-12-08
Re: Reiter Trails 2/21/2009
This is all I got. Can't wait for the video Jim!


















_________________
"You'd better come to the table with at least 24 inches of wheel travel and 1,000 hp to get noticed nowadays."

SUPAFLY- Moderator
- Posts: 871
Join date: 2007-12-06
Age: 32
Location: Renton, WA

Re: Reiter Trails 2/21/2009
looks like fun, thanks for the pics

mike- Club Member
- Posts: 82
Join date: 2008-03-23
Age: 28
Location: milton
Re: Reiter Trails 2/21/2009
mike wrote:looks like fun, thanks for the pics
Wait til you see the video!
_________________
"You'd better come to the table with at least 24 inches of wheel travel and 1,000 hp to get noticed nowadays."

SUPAFLY- Moderator
- Posts: 871
Join date: 2007-12-06
Age: 32
Location: Renton, WA

Re: Reiter Trails 2/21/2009
Yeah, looking forward to the videos, it was good wheeling with everyone this weekend. Also good to meet new folks, and to finally get to wheel with Jon & Jessi 

Zip- Club Member
- Posts: 1134
Join date: 2007-12-07
Location: Renton, WA
Re: Reiter Trails 2/21/2009
Nice pics! We also had a really great time and enjoyed wheeling with you all!

white knuckler- President
- Posts: 177
Join date: 2007-12-10
Age: 34
Location: Snohomish, WA
Reiter Pit Carnage
This was the maiden run with the new old jeep. I said before the day started, lets see what falls out the bottom and i'll know what to replace. That stump just would not move.
[/img]
Nothing more fun than putting on new parts. front drivers side u-joint lost a cap and most of the bearings out one more.
[img]
[/img][img]
Just returned to wheeling after a 8 year absence. Beat a 52 Flatfender for a whole bunch of years.
Thanks for the invitation Zip to break some parts. Hope to see you all on the trail again.
A good picture Sue took of somebody else's Jeep.
[img]
[/img]
[/img]Nothing more fun than putting on new parts. front drivers side u-joint lost a cap and most of the bearings out one more.
[img]
[/img][img]Just returned to wheeling after a 8 year absence. Beat a 52 Flatfender for a whole bunch of years.
Thanks for the invitation Zip to break some parts. Hope to see you all on the trail again.
A good picture Sue took of somebody else's Jeep.
[img]
[/img]Last edited by MadMark on Tue Feb 24, 2009 9:57 pm; edited 1 time in total (Reason for editing : add photo)

MadMark- Candidate
- Posts: 61
Join date: 2009-02-25
Location: Renton
Re: Reiter Trails 2/21/2009
Straighten the bent tie-rod & drag link for a spare...good wheeling with you again

Zip- Club Member
- Posts: 1134
Join date: 2007-12-07
Location: Renton, WA
Re: Reiter Trails 2/21/2009
Zip wrote:Straighten the bent tie-rod & drag link for a spare...good wheeling with you again
Yup, that's what I did. I picked up a used ZJ tie-rod that is a direct bolt on replacement, only much beefier. And I carry the old one as a spare...

wsm04rubi- Admin and VP
- Posts: 1413
Join date: 2007-12-05
Location: Snohomish, WA

Re: Reiter Trails 2/21/2009
Bill, Justin, can I use some of these pics in the video?
~Jim
~Jim
Jim1973- Tire Kicker
- Posts: 65
Join date: 2007-12-08
Re: Reiter Trails 2/21/2009
Of course!
_________________
"You'd better come to the table with at least 24 inches of wheel travel and 1,000 hp to get noticed nowadays."

SUPAFLY- Moderator
- Posts: 871
Join date: 2007-12-06
Age: 32
Location: Renton, WA

Permissions of this forum:
You cannot reply to topics in this forum
R-n-L Site





